iPU Macbook MDM BYPASS – T2, M1, M2, M3 Ventura, Sonoma, All Supported – New Solution
iPU MACBOOK T2 ACTIVATOR OWNER INFO FROM ANY T2 DEVICE ( New bridge OS version Supported )
IPU macbook t2 activator owner info from any t2 device ( new bridge os version supported )
supported:
passcode screen
firmware pin screen
lost mode screen
no supported:
hello screen / earth icon screen
with an app, you can recover info like:
user name
user lastname
user fullname
user email
requirements:
macos system high sierra (10.13) or newer
any intel device
at m1 chip jailbreak process can not work correctly.
additional features:
backup of activation policy to our server (in future could be used for bypass)
fmi on to off switch in mac settings > icloud (it does not remove icloud from the server)
___
iPU T2 EFI AUTH – Without lose DATA
ipu t2 efi – efi / padlock / icloud pin / firmware password removal for all t2 devices
data saved – you don’t loose your mac data
___
iPU T2 RActivator Tethered – iCloud Bypass for all T2 devices with bridgeOS 7.4 And Newer
fresh bypass:
1. enter dfu mode.
2. authenticate the device.
3. patch the device.
4. once successful, enter dfu mode again.
5. bypass the device.
6. press the power button once, and immediately press and hold option + command + r or command + r.
7. connect to wi-fi.
8. from the recovery mode, erase the disk using disk utility.
9. connect to wi-fi. if wi-fi is not detected (no networks are shown), click on the wi-fi icon > other > manually enter the ssid (network name), choose the password type, and enter the password.
10. install the system.
if you need to rebypass (already installed system):
1. enter dfu mode.
2. click on “bypass device.”
3. press the power button once and wait until the system loads.
4. done.